HIKVISION 24 PORT 10/100/1000MBPS FAST ETHERNET SMART POE MANAGED SWITCH (DS-3E1526P-EI/M)

SPECIFICATION

BRAND : HIKVISION

MANUFACTURE : SWITCH POE

MODEL : DS-3E1526P-EI/M

POE PORTS : 24 PORTS GIGA POE

MAX POE POWER BUDGET : 230W

MANAGED TYPE : MANAGED

DESCRIPTION

HIKVISION 24 Port Gigabit Smart POE Switch- DS-3E1526P-EI/M, 24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port, Total PoE power budget 230 W Support IEEE 802.1Q VLAN tagging, Support energy saving mode with user-configurable plans, Support IEEE 802.3az Energy Efficient Ethernet (EEE) standard, saving power during periods of low data activity Support STP/RSTP Loop prevention, Support cable detection to locate failure, Support DHCP snooping 6 kV surge protection.

Shell Metal material, Net Weight 2.96 kg (6.52 lb), Gross Weight 3.2 kg (7.05 lb), Dimensions (W × H × D) 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73''), Installation Mode Rack (equipped with mounting ears), Max. Power Consumption 250 W, Power Consumption in Idle30 W, Surge Protection6 KV, Network Parameters Ports24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port, MAC Address Table8 K, Switching Capacity56 Gbps, Packet Forwarding Rate41.66 Mpps, Internal Cache4.1 Mbits,

Software Function Long Range Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition. Port Isolation Ports 1 to 26: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. PoE WatchdogPorts 1  to 24: auto detect and restart the cameras that do not respond. Link Aggregation Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.

Support static link aggregation. Support 8 aggregation groups. QoS QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.Support port-based priority configuration. Support SP and WRR priority scheduling modes. Loop Prevention Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP. VLAN VLAN is used for network scale planning and network health improvement. Support 802.1Q.Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. HPP, Support one-click activation and remote management via Hik-Partner Pro.

Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device. System Maintenance Support device management via web. Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses. Support Super IP, which is a configurable IP address (default: 10.180.190.200) for direct access.

Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. DHCP SnoopingDHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. PoE Power Supply-PoE StandardIEEE 802.3af,IEEE 802.3at, PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-), PoE PortPoE: Ports 1 to 24, Max. Port Power30 W, PoE Power Budget230 W.